FOGGY 1000 portable misting system for sanitation and humidification, 1 L/h

Why do we recommend this nebulizer for disinfection and humidification?
The FOGGY 1000 nebulizer ultrasonic humidifier with fog effect is a modern tool for cleaning environments and controlling relative humidity.

It carries out in particular:

Disinfection cycles
Microclimate control by humidification

Foggy 1000 Sanitizing nebulizer. Benefits.
- Nebulizer for high-efficiency sanitation thanks to the size of the atomized droplets, whose diameter is between 1 and 10um (micron).
- Quiet and safe cold mist system.
- Easy to install and transport, it weighs only 3.5 kg.
- Despite its small size, it has a large 11L tank which guarantees great autonomy.
- The Foggy 1000 sanitation and humidification nebulizer exploits the best of ultrasonic nebulization technology.
- Control by microprocessor and with an integrated humidity sensor: automatic process.
- Foggy 1000 also includes a negative ion generator, useful for air purification during treatment (ANION function).
- 3 power levels to use as needed.
- The timer between 1 and 12 hours, in one hour steps.
- Acoustic alarm and indicator light (red) in the event of a lack of water. When the water tank is empty, the safety system automatically stops the nebulization circuit.
- Remote control included for remote control.
- The technology applied to this sanitizing nebulizer and the quality obtained through years of experience in the sector make the FOGGY 1000 an excellent device capable of giving maximum satisfaction in terms of efficiency and reliability over time.
- Foggy 1000 is a professional ultrasonic humidifier with misting effect which is controlled by a microprocessor and also contributes effectively to environmental sanitation in accordance with Decree 274. It notably carries out disinfection cycles and microclimate control by humidification.

Standard equipment nebulizer for disinfection and humidification
The Foggy 1000 sanitizing nebulizer is supplied in a wooden case with:
- Foggy 1000 unit,
- 50 cm nebulizer tube,
- 90° elbow,
- 45° elbow,
- manual installation, use and maintenance.

How the Ultrasonic Disinfectant Nebulizer Technology Works.
Ultrasonic nebulizers use a piezoelectric translator to create a high-frequency mechanical oscillation in water. Water tries to follow the high frequency oscillation but cannot do so due to its comparative weight and mass inertia. This creates a momentary vacuum on the negative oscillation, causing the water to cavitate into vapor. The transducer follows this with a positive oscillation which creates high-pressure compression waves on the water's surface, releasing tiny water vapor molecules into the air.
It is an extremely fine mist approximately 1 µm in diameter which is quickly absorbed into the airflow. Since mist is created by oscillation and not heat, there is no need to increase the water temperature.
Ultrasonic humidifiers for this are capable of creating instant humidity and there is no need to wait for a heating element to boil the water. This precise on/off humidity control is what makes ultrasonic humidifiers special. Additionally, compared to other humidifiers, ultrasonic humidifiers can be smaller in size but at the same time capable of producing considerable amounts of steam. When the measured humidity is lower than a set value, the ultrasonic humidifier starts to work. When this value exceeds the set threshold, the humidifier turns off. In this way, it is very easy to maintain high humidity levels inside a room, because the ultrasonic humidifier works automatically.